C. R. Laurence
CRL Tremco® Wedge Gasket Glazing Spline
CRL Tremco® Wedge Gasket Glazing Spline
Couldn't load pickup availability
Tremco® Wedge Gasket Glazing Spline
All models are designed for compression glazing systems using Tremco® POLYshim II Glazing Tape.
A mock-up is recommended by Tremco® to verify proper engagement with the metal nib before installation.
Model: 0.120 in. Face Clearance
- Brand: Tremco
- Durometer: 70
- Face Clearance: 0.120 in. (3 mm)
- Material: EPDM
- Finish/Color: Black
- Roll Length: 500 ft. (152.4 m)
- Metal Requirements: 0.062 in. × 0.09 in. Metal Nib (1.5 mm × 2 mm)
This wedge gasket is made of dense 70 durometer extruded EPDM, designed for compatibility with Tremco® POLYshim II Glazing Tapes. Requires a properly sized metal nib for effective sealing in compression glazing systems.
Model: 0.160 in. Face Clearance
- Brand: Tremco
- Durometer: 70
- Face Clearance: 0.160 in. (4.1 mm)
- Material: EPDM
- Finish/Color: Black
- Roll Length: 500 ft. (152.4 m)
- Metal Requirements: 0.062 in. × 0.09 in. Metal Nib (1.5 mm × 2 mm)
This version offers a slightly wider face clearance while maintaining the same strength and flexibility. It is ideal where a tighter compression or tolerance adjustment is required.
Model: 0.200 in. Face Clearance
- Brand: Tremco
- Durometer: 70
- Face Clearance: 0.200 in. (5.1 mm)
- Material: EPDM
- Finish/Color: Black
- Roll Length: 500 ft. (152.4 m)
- Metal Requirements: 0.062 in. × 0.09 in. Metal Nib (1.5 mm × 2 mm)
The largest of the three models, this gasket accommodates wider spacing between surfaces while delivering the same weather-sealing performance expected of Tremco® systems.
Comparison Table
| Specification | Model 1 (0.120 in.) |
Model 2 (0.160 in.) |
Model 3 (0.200 in.) |
|---|---|---|---|
| Brand | Tremco | Tremco | Tremco |
| Face Clearance | 0.120 in. (3 mm) | 0.160 in. (4.1 mm) | 0.200 in. (5.1 mm) |
| Material | EPDM | EPDM | EPDM |
| Durometer | 70 | 70 | 70 |
| Finish/Color | Black | Black | Black |
| Roll Length | 500 ft. (152.4 m) | 500 ft. (152.4 m) | 500 ft. (152.4 m) |
| Metal Nib Requirement | 0.062 in. × 0.09 in. (1.5 mm × 2 mm) |
0.062 in. × 0.09 in. (1.5 mm × 2 mm) |
0.062 in. × 0.09 in. (1.5 mm × 2 mm) |
What happens if the product is sold out?
What happens if the product is sold out?
If the product is sold out, please contact us by email directly at info@glassparts.ca.
We will inform you about the options at your disposal.
Pick up & Shipping
Pick up & Shipping
Shipping is available for the moment.
Pick up at 1250 rue Tellier, Laval, Québec, H7C 2H2.
Return policy
Return policy
· All sales for tempered glass are final as soon as they leave the warehouse or as soon as they have been put in production.
· All sales for mirrors are final if they have been installed. Mirrors must be returned in perfect conditions in order to get a trade or a refund.
· All sales for hardware are final if they have been tampered with and must come back with full packaging for a trade or a refund.
Disclaimer
Disclaimer
Disclaimer:
All information and technical recommendations are offered to the best of our knowledge and are non-binding. It is your responsibility to determine the correctness and suitability of any product for your specific application. The use, processing, and installation of any product are beyond our control.GlassParts is not liable for any damages, misuse, or incorrect installation of any product.
Product Color:
Please note that product colors may appear differently in person than they do on your screen. Variations can occur due to differences in computer video cards, monitor settings, and lighting conditions. We strive to present images as accurately as possible, but cannot guarantee exact color representation.
Share
