CRL Tan 33S Silicone Sealant
Specifications
| SKU | 33ST |
|---|---|
| Brand | C. R. Laurence |
Product overview
Our Best-Selling Silicone with Special Additives to Resist Mold and Mildew Plastic Cartridges With Screw-On Nozzles
Available in Eight Colors 24 Month Shelf Life* 10 Year Limited Warranty
This is our most popular sealant! CRL 33S Silicone is a high quality sealant that delivers the performance you demand at a competitive price. It is a one component, room temperature curing, acetic cure, 100% silicone elastomer that does not require the addition of activators, stabilizers, or catalysts to achieve optimum performance.
Basic Uses - CRL 33S Silicone is especially designed for joining and sealing most non-porous building materials including a variety of structural materials: glass, aluminum, stainless steel, wood, and plastics. All surfaces must be properly cleaned and the sealant tooled for good adhesion. Cat. No. S1L2100 Primer may be required for these and other substrates as well. It has a wide operating temperature range of -80° to 400°F (-62° to 204°C), and can be applied at outdoor temperatures as low as -35° to 140°F (-37° to 60°C). 33S exhibits strong physical properties: 350 psi Tensile Strength; 120 psi Lap Shear at 1/8" (3 mm) thickness and Tear Strength of 25 ppi. It will seal curtainwall joints, steel and aluminum windows, and skylights. Indoor uses include bathtubs, showers, and sanitary installations (mildew resistant clear, white, translucent white, and tan contain a fungicide for cured beads that are mildew resistant). Limitations - It is not recommended for structural glazing or insulating glass glazing, concrete and stone expansion joints, horizontal decks, patios, driveway or terrace joints where abrasion is possible. Not recommended for use on concrete, marble, limestone, lead coated, copper & brass surfaces, submerged joints (swimming pools and aquariums), plazas, decks, pavements, etc. Not suitable for painting. Check cartridge label and Specification Data Sheet for additional limitations. Comparable Sealants - Dow Corning®: 999-A; 786; 732; 700; Glazing Silicone; General Purpose; Commercial Grade 100%; Tub, Tile and Ceramic, HVAC/R.Dap: 100% Silicone.GE®: 1200 Construction, 1000 Contractors, 1700 Sanitary. Tremco®: Proglaze, Tremsil 200, TremPro 644. OSI: HM-270. Pecora: 860, 863. Sika®: SikaSil® GP. Sonneborn: OmniPlus. Technical Data - Meets or Exceeds Federal Specifications: TT-S-001543A (COM-NBS) Class A, for Silicone Building Sealants TT-S-00230C (COM-NBS) Class A, for One-Component Building Sealants ASTM C-920 for Elastomer Joint Sealants, Type S, Grade NS, Class 25, Use NT, G, A CAN/CGSB 19.13-M87. CRL 33S Meets the Requirements of FDA Regulation Number 21 CFR 177.2600 for Use in Food-Related Applications, Such as Walk-in Freezers and Refrigerated Trucks. CRL 33S is Certified by NSF to Standard 51 - Plastic Materials and Components Used in Food Equipment. CRL 33S is a "UL Recognized Component." Meets California Air Resources Board 2003 Requirements for Volatile Organic Compound (VOC) Content. Qualifies for LEED® (Leadership in Energy and Environmental Design) Green Building Rating System Credit. NOTE:This silicone is and will remain clear if properly stored in a cool dry place and away from direct sunlight. When uncured silicone is exposed to UV radiation (sunlight) it turns pinkish until it cures, it is the exposure to UV that causes the pink hue. Once cured, 24-48 hrs., the pink hue disappears completely
Product Warning:Not recommended for structural glazing or insulating glass glazing, concrete and stone expansion joints, horizontal decks, patios, driveway or terrace joints where abrasion is possible. Not recommended for surfaces with special protective or cosmetic coatings such as mirrors, reflective glass, polyethylene or polypropylene surfaces. Not recommended for use on concrete, marble, limestone, lead coated, copper & brass surfaces, submerged joints (swimming pools), plazas, decks, pavements, etc. Remove all old sealant before applying new. Not suitable for painting. Check cartridge label and Specification Data Sheet for additional limitations.
Available options
| SKU | Finish | Sold as | Shipping weight |
|---|---|---|---|
| 33ST | Tan | Each | 0.8 lb |
Specifications
| Brand | CRL |
|---|---|
| Cartridge Contents | 10.3 oz.(304.6 ml) |
| Case Quantity | 30 |
| Shelf Life | 24 from DOM |
Important information
- Check the dimensions, glass thickness, mounting conditions and local building code before ordering.
Documents
- Glass Railing Installation Sealants Information
- CRL Sealant Basic Uses and Limitations
- 33S Safety Data Sheet
- 33S Silicone Spec Data Sheet
- Sealant Requirement Estimator Chart
- Silicone Sealant Limited Lifetime Warranty
- NSF Sealant Certification
- Delivery may take longer than expected. For more information, contact us by email at info@glassparts.ca.
CRL Tan 33S Silicone Sealant is backordered and will ship as soon as it is back in stock.
Pickup available at Warehouse
Usually ready in 2-4 days
Pick up and Shipping
Pick up and Shipping
For custom-made glass orders, please note that shipping generally takes1–2 weeksfrom our supplier before we receive the panels and can proceed with fulfillment.
For Wine Cellar racks we have a 30 days production delay.
Pick up at 1250 rue Tellier, Laval, Québec, H7C 2H2.
CRL Tan 33S Silicone Sealant is backordered and will ship as soon as it is back in stock.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
