Step 1 – Outline Your Fence Path:
👉Use a tape measure to trace the full path around your pool. Maintain a minimum distance of 48" to 60" (4–5 ft) from the waterline to meet safety standards.

Step 2 – Measure Straight Sections:
👉Break the perimeter into straight-line segments and measure each section precisely.

Step 3 – Choose Your Panel Widths:
👉12mm Clear Tempered Glass width include all size.Choose combinations that best fit your layout with minimal gaps.
👉 Important: Leave a consistent gap of minimum 1/2" (12.7 mm) and maximum 1"(25.4 mm)between each panel for proper spacing and alignment.

👉 Leave 1/4" gap on the hinge side between the door and hinge panel, and 5/8" on the latch side for proper clearance.

Step 4 – Count Spigots,Glass Door, Hinge Set,Pool Fencing Latche & Connectors:
👉You’ll need 2 Spigot per panel minimum, and 90° or Ajustable angle Glass Connector where needed.

👉Spring Self-Closing Glass Door Hinge Set
👉 Highly recommended: Add 180° glass-to-Glass Connector between each panel to strengthen the structure, especially in windy areas or open spaces.

Step 5 – Plan Your Door:

👉You must order a 10mm Clear Tempered Glass Door With Hinge Cutout
👉 You must order a fixed 12mm Clear Tempered Glass With Hinge Cutout to support the door hinges.

📏 Standard Hinge Panel Widths (46” Height)

For a 46" high glass fence, available hinge-ready panel width include:
24", 26", 28", 30", 32", 34", 36", 38", 40", 42", 44", 46"

✅ Always verify availability before finalizing your layout. Planning around stock sizes helps avoid custom glass costs and delays.

Still unsure? Our support team will help you configure the best layout based on your space and our available glass panel sizes.