CRL SPS Extended Support Assembly
Specifications
| SKU | 90TSX1 |
|---|---|
| Brand | C. R. Laurence |
Product overview
Accommodates Up to a 40" (1.02 m) Vertical Suspension from Structure
Provides Fine-Tune Adjustment
The SPS Extended Support Assembly is used when the mounting substrate is as far as 40" (1.02 m) from the top of the SPS Overhead Track. Each set consists of a steel Upper Mounting Bracket, an aluminum Lower Mounting Bracket, two 1/2"-13 x 40" (1.02 m) long Suspension Rods, a 3/8"-16 x 1-1/4" (31.7 mm) Track Mounting Bolt, nine 1/2"-13 Hex Nuts, nine Flat Washers, and five Lock Washers.
The Upper Mounting Bracket requires a single fastener (not supplied) to attach it to the substrate, or if mounting to steel, it can be welded. It can also be eliminated by attaching Suspension Rods directly to the steel substrate. Consult a structural engineer for recommendations. NOTE: When mounting substrate is over 6" (152 mm) from the top of the SPS Overhead Track, CRL Cat. No. 90TSA1 Angled Support Assemblies must be used to stabilize the entire SPS Overhead Track.
Product Warning:STRUCTURAL DISCLAIMER - All customers who in any way utilize this product are solely responsible to consult a structural engineer to determine the suitability of the product for the intended use and site conditions. All installers must be qualified and have professional knowledge about compliance with local, state and federal regulations, safety factors, and the appropriate choice of fixing material and procedures.
Available options
| SKU | Finish | Sold as | Shipping weight |
|---|---|---|---|
| 90TSX1 | Each | 0.01 lb |
Specifications
| Works With | SPS System |
|---|
Important information
- Check the dimensions, glass thickness, mounting conditions and local building code before ordering.
Documents
- Intelli-Track SPS Installation Instructions
- SPS Stacking Partition System Specifications
- Top Hung SPS Stacking Partition System CAD Drawings.pdf
- Intelli-Track SPS Use and Maintenance Manual
- SPS Stacking Partition System Engineering (US)
- Delivery may take longer than expected. For more information, contact us by email at info@glassparts.ca.
CRL SPS Extended Support Assembly is backordered and will ship as soon as it is back in stock.
Pickup available at Warehouse
Usually ready in 2-4 days
Pick up and Shipping
Pick up and Shipping
For custom-made glass orders, please note that shipping generally takes1–2 weeksfrom our supplier before we receive the panels and can proceed with fulfillment.
For Wine Cellar racks we have a 30 days production delay.
Pick up at 1250 rue Tellier, Laval, Québec, H7C 2H2.
CRL SPS Extended Support Assembly is backordered and will ship as soon as it is back in stock.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
