CRL Polished Brass Geneva 180 Series 180 Degree Glass-to-Glass Standard Hinge

$103.58

Details

  • Self-Centering with Reversible 5 Degree Pivot Pin
  • Use Monolithic Tempered Glass
  • Available in Several Beautiful Finishes
  • Three Year Warranty
  • 180 Degree Glass-to-Glass Standard Model (Factory Set for Standard Closing Position)

The CRL Geneva Series of professional Hinges is able to accommodate 5/16″ (8 mm) to 1/2″ (12 mm) glass. A variety of six styles gives design flexibility, including three different Wall Mount and three different Glass-to-Glass types. Geneva Hinges are self-centering and contain a Reversible 5 degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate “off-angle” installations. Made of solid brass with all moving parts (pins and springs) in stainless steel.

More details

Catalog Number:

GEN180BR

Color:

Polished Brass

Glass Thickness:

5/16″ to 1/2″ (8 to 12 mm)

Height:

3-1/2″ (89 mm)

Width:

2-3/16″ (56 mm)

Shipping Weight:

2 lb (907g)

Minimum Order:

1 Each

WARNING:

This product can expose you to BRASS, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Additional product information

Standard Reversible Pivot Pin:

Each Geneva Hinge contains a Reversible Pivot Pin. One side of the Pin is marked 90 Degrees. The opposite side is marked 85 Degrees. Standard Geneva Hinges come with the 90 Degrees side activated. Offset Models come with the Pin pre-set to 85 Degrees (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

Using two hinges with 5/16″ to 1/2″ glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28″ (711 mm).

Using three hinges with 5/16″ to 1/2″ glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32″ (813 mm).

Custom Pivot Pin:

Custom Pivot Pins (Cat. No. GENP1N) are available to accommodate “off-angle” installations. If the 5 Degree Reversible Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degrees). If using the Custom Pivot Pin, contact our Technical Sales Shower Door Department. Your glass sizes and the aesthetics of the enclosure may be affected by the use of the Custom Pivot Pin.

Specifications

Glass Thickness

5/16″ (8 mm) to 1/2″ (12 mm) Tempered Safety Glass

Special Feature

Offers choice of Standard Model factory set at standard 0 degree closing position, or 5 degree Pre-Set Model for tighter closure into shower interior.

Construction

Solid Brass

Hinge Swings

90 degree in and 90 degree Out

Closing Type

Self-Centering when within 15 degree of Closed Position

Cut-Out Required Includes

Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. GEN13 Gasket Pack must be purchased separately for use with 5/16″ (8 mm) thick tempered glass.

SKU: GEN180BR Category: Tags: ,

Reviews

There are no reviews yet.

Be the first to review “CRL Polished Brass Geneva 180 Series 180 Degree Glass-to-Glass Standard Hinge”

Your email address will not be published.